Got a drawing?
We'll make it.
Laser cutting, folding, welding and CAD under one roof - plus painted and plated finishes through long-trusted partners. Whatever your product needs, Wheeler delivers the full solution.
- Can you laser cut / fold / weld? Yes.
- CAD we accept: DXF, DWG, STEP, SolidWorks - or a sketch
- Painted & plated via partners of 30+ years (own paint line 2027)
- 30+ Years on the tools Witton, Birmingham
- 16835+ Parts nested & shipped Counted from the shop floor
- 5.0★ Google score 13 verified reviews
- 3 ISO disciplines 9001 · 45001 · 14001
Cut. Fold. Weld. CAD. Paint.
Those are the first questions - every time. The answer is yes: we offer the full set of solutions for your product needs, under one roof in Birmingham.
- Can you laser cut? Yes - fibre laser up to 10mm, sheets to 3m × 1.5m. Laser cutting
- Can you fold? Yes - press brakes up to 3m, offline programming for repeat jobs. Bending & forming
- Can you weld? Yes - MIG & TIG on mild steel, stainless and aluminium. MIG & TIG welding
- What CAD can you accept? DXF, DWG, STEP, SolidWorks - or a sketch / PDF. We tidy it for manufacture. CAD & design
- Do you paint? Yes - painted and plated products via trusted partners of 30+ years. Our own paint line is due 2027. Ask about finishing
Need more than that? Rolling, engraving, inserts, assembly and full fabrication too. See all services
From your problem to a finished part
One place for the full job: send what you have, we cut, fold, weld and finish - including paint and plate through partners of 30+ years - so every product need is covered.
-
Send a sketch, drawing or CAD
No job too small. We work from a napkin sketch, PDF or full STEP file.
-
We cut
Fibre laser cutting with tight tolerances - your blank nested and cut in-house.
-
We fold and finish
Press-brake forming, welding and assembly by one team under one roof.
-
You get a finished part
ISO-accredited quality - painted or plated via trusted partners when needed. Own paint line due 2027.
Every solution under one roof
Laser, fold, weld and CAD first - the questions every buyer asks. Then rolling, full fabrication, garden screens - and painted or plated finishes when the product needs them.
Laser
Laser Cutting
Need a blank cut today? Fibre laser cutting up to 10mm with tight tolerances - we nest and cut so your job keeps moving.
Steel · Stainless · Aluminium · Brass Explore
Bending
Bending & Forming
Got a flat pattern that needs folding? Press-brake bending up to 3m with offline programming for accurate, repeatable parts.
Up to 3m · Repeatable runs Explore
Welding
MIG & TIG Welding
Need it welded? MIG and TIG on mild steel, stainless and aluminium - assembled and finished in the same workshop.
Certified · Pressure-tested available Explore
CAD
CAD & Product Design
What CAD can we accept? DXF, DWG, STEP, SolidWorks - or a sketch / PDF. We turn it into a manufacture-ready file.
Radan · Bysoft 7 · SolidWorks Explore
Rolling
Rolling & Engraving
Sheet metal rolling now up to 6mm & 3.5m, plus precision laser engraving and part marking.
Rolling to 6mm × 3.5m Explore
Fabrication
Metal Fabricated Products
Bespoke and production-run metal parts - prototypes to full assemblies, all under one roof.
Prototypes · Production · Assembly Explore
Screens
Bespoke Garden Screens
Homes & gardensLaser-cut garden screens and decorative panels - a popular product line from the same factory. Looking for awning brackets? That is our sister brand, Load Bear.
Made-to-order · Direct from the factory ExploreNo job too small. Need punching, inserts, de-burring, assembly, paint or plating? Tell us about the part - we will take it from there.
Tell us about your project One place for the whole solution
Buyers come to Wheeler with a product problem. We cover cut, fold, weld, CAD and finish - including paint and plate through trusted partners - so the job does not bounce between shops.
-
We work from anything
Sketch, PDF, DXF, DWG, STEP or SolidWorks. No perfect file required - we turn what you have into a manufacture-ready part.
-
Genuinely fast turnaround
Rush jobs delivered early are our reputation. Reviewers regularly mention same-day or 24-hour turnarounds when it mattered most.
-
Full capability, start to finish
Laser, press brake, MIG/TIG, CAD and assembly in-house - plus painted and plated products via partners of 30+ years. Own paint line due 2027.
-
No job too small
Custom wheelchair parts, a one-off bike riser, a last-minute weld repair - if it is metal and it needs doing right, we will take it on.
Real jobs. Real deadlines. Five stars.
Bought an Ebike that was too low to pedal. Got a picture of a seat riser I saw online and took it to Wheeler Fabrications and they made a factory-looking custom riser two days earlier than was agreed. And it didn't cost …
Needed some parts making for my wheelchair that was custom made a few years ago. Thought the job may be too small but from the first phone enquiry to receiving the parts just 24 hours later they were brilliant. Can't rec…
This company pulled out the stops to enable me to meet the needs of a major customer of my business. I put them under enormous pressure, and their response was great and well beyond my expectations. Their performance has…
Big thank you to Emma & Mark. I was in a hurry, came from London and needed a repair place to weld my item together. Rang quite a few places in Birmingham and they were useless - ignored me or turned me away. Emma was so…
I gave them an impossible task with a stupidly fast turnaround time and they had everything ready for me ahead of schedule and to a huge degree of quality. I'll be coming back every time I need bespoke rigging from now o…
I recently had some electrical panels fabricated at Wheeler Fabrications. Mark was an absolute pleasure to work with and extremely helpful throughout the whole process. With the skill set of the team and using some of th…
Quality you can put in a procurement file
Triple ISO accreditation isn’t a badge on the wall - it’s independently audited proof that every part is made to a documented, repeatable standard.
Latest case studies
-
The First Steps To Producing Metal Fabrications
The first steps to producing metal fabrications - from steel sheet to formed parts.
Read case study → -
Laser Cut Brass Plates
In January we were asked to laser cut three brass plates each with a different intricate pattern, when finished they were put on top of each other to create an impressive prop that features in one of the theatres productions as a sanatorium grill.
Read case study → -
Large Brass Baffles
Recently we had been asked if the Laser could cut large brass baffles. After designing a clamping system for the sheets to compensate for material moving due to nearly 1700 holes, we were successful in cutting 30 discs with no failures.
Read case study →
Decorative panels here. Awning brackets next.
Laser-cut garden screens and panels are made at Wheeler Fabrications - often the first product conversation before Load Bear. When the job is precision awning brackets and hardware, that is our sister brand Load Bear - stainless steel, UK-ready, 5-year structural warranty.
Got a drawing? Let’s get it made.
Send us your idea, a sketch, a CAD file or just a description, and we’ll come back with a clear, competitive quote. No job too small, no run too large.